Radiotehnika T6 speaker stands
660 mm · plate 150×170 · ≤ 30 kg · universal · fillable · entry
Instalment: Buy now, pay later: 0-0-10 at our expense
Delivery by: 2026-11-09
prices and stock as of 2026-11-05
Audiomania expert verdict
Radiotehnika T6 are universal 660 mm stands for bookshelf speakers: 150 × 170 mm top plate, 30 kg load, a fillable aluminium column, veneered plates and adjustable spikes. Specialists confirmed fit with a dozen popular bookshelves; buyers note the stability and 5-minute assembly. AI draft, under review
Ask about Radiotehnika T6
Will it suit your amplifier or room, what else to buy, what to compare with.
In brief
Best if you are looking for:
- most bookshelf speakers 150–250 mm wide and up to 30 kg: Sigma 1.01, ELAC Debut / Carina, Klipsch RB51 / RP-500M, ProAc Studio 110 confirmed by specialists AI draft, under review
- the right tweeter height on a budget — 66 cm puts a typical bookshelf tweeter at seated ear level AI draft, under review
- tweakers: the column takes 2.5 kg of sand or shot AI draft, under review
- quick assembly — “put together in 5 minutes”, instructions included AI draft, under review
- wood interiors: veneered plates, a Wood variant with a plywood base AI draft, under review
Keep in mind:
- the stand is light (≈ 3 kg): without ballast damping is modest — add sand for heavy speakers or loud listening AI draft, under review
- speakers merely rest on the plate — if they might get knocked, use double-sided tape or pads AI draft, under review
- parquet and laminate need spike pads (Audiocore Protector 01) AI draft, under review
- priced per pair; the 150 × 170 mm plate — for wide speakers (over 25 cm) a specialist suggests “a wider top plate” AI draft, under review
Product DNA
L077%A structured sound passport: every value carries a source and a confidence.
- Fit rule
- tweeter at ≈ 100 cm; speaker base up to 250 × 283 mm, up to 30 kgcalculated1
- Use scenarios
- not enough data to calculate
- Optimal room area
- not enough data to calculate
- Tier
- entrycalculated1
- What else you need
- calculated1
Sound profile
The profile appears after an Audiomania expert audition.
Sound character
No audition or professional review yet — below are only facts from the specs and calculations.
Use scenarios
Suits:
- bookshelves 37–50 cm tall and 150–250 mm wide AI draft, under review
- sand filling for heavy speakers and loud listening AI draft, under review
- wood interiors (veneer, Wood variant) AI draft, under review
Less suited to:
- wide, heavy monitors over 25 cm — a bigger plate needed AI draft, under review
- rear speakers behind a sofa back — more height needed AI draft, under review
- homes with children and pets without fixing — speakers are not secured AI draft, under review
Technologies and construction
Fillable aluminium column
What it is: An aluminium centre column with a cavity for ballast — up to 2.5 kg of calcined sand or fine lead shot.
Practical benefit: “adds weight to the T6 and damps them further” — less cabinet vibration transmitted.
Veneered MDF / plywood plates
What it is: MDF top plate, class-A plywood (Wood) or MDF base; both in natural veneer.
Practical benefit: The 270 × 340 mm base gives stability; veneer suits furnished rooms. AI draft, under review
Adjustable spikes
What it is: Height-adjustable spikes on the base plate.
Practical benefit: “let you level the stand precisely”; on parquet use spike pads.
Flat-pack assembly
What it is: Supplied flat-packed with detailed instructions; 3M silicone pads in the box.
Practical benefit: “assembled in 5 minutes”; easy to dismantle when moving. AI draft, under review
Which speakers it suits
- Fit rule
- tweeter at ≈ 100 cm; speaker base up to 250 × 283 mm, up to 30 kgcalculated1
118,990 RUB · in stock
Why
DALI Opticon 2 MK2 on Radiotehnika T6 (660 mm) puts the tweeter at 0.93 m — seated ear level (1 m). The 150×170 mm plate under a 195×297 footprint is stable; load 7.7 of 30 kg.
44,900 RUB · in stock
Why
ELAC Debut B6.3 on Radiotehnika T6 (660 mm) puts the tweeter at 0.92 m — seated ear level (1 m). The 150×170 mm plate under a 195×298 footprint is stable; load 7.8 of 30 kg.
28,990 RUB · in stock
Why
Radiotehnika S-20N on Radiotehnika T6 (660 mm) puts the tweeter at 0.93 m — seated ear level (1 m). The 150×170 mm plate under a 170×275 footprint is stable; load 4.7 of 30 kg.
61,990 RUB · in stock
Why
Radiotehnika Sigma 1.01 on Radiotehnika T6 (660 mm) puts the tweeter at 1.0 m — seated ear level (1 m). The 150×170 mm plate under a 280×297 footprint is stable; load 13.5 of 30 kg.
Comparison with similar models
How it differs from Wharfedale ST1 speaker stands
Radiotehnika T6 and Wharfedale ST1 are the same tier; they differ in character and in the figures below.
Full comparison →How it differs from KEF S2 speaker stands
Radiotehnika T6 and KEF S2 are the same tier; they differ in character and in the figures below.
Full comparison →
Specifications
Main
- Max load
- 30 kg
- Sold as
- per pair
Construction
- Fillable
- possible; max kg: 2.5; material: прокалённый песок или мелкая свинцовая дробь
- Material
- верхняя плита — MDF в натуральном шпоне; нижняя плита — фанера класса А в шпоне (цвет Wood) или MDF в шпоне (прочие цвета); центральная опора — алюминий
- Feet
- spikesAudiomania
- Finishes
- Wood
Dimensions
- Height
- without spikes: 640; with spikes: 660
- Top plate
- 150 × 170 mm
- Bottom plate
- 270 × 340 mm
Weight
- Weight (each)
- 3 kgAudiomania specialist
Box contents
- In the box
- комплект для самостоятельной сборки (две стойки), инструкция, регулируемые шипы, силиконовые подушечки 3M (по отзыву покупателя)Audiomania
Documents
FAQ
›Is the price for two stands or one? Which spike pads do you recommend?
›Can I put speakers with a 22 × 32 cm base on them, or do I need a bigger plate?
›Do they suit the Radiotehnika Sigma 1.01?
›How much does one stand weigh and how much sand can it take?
›Is it true that a heavier stand means cleaner sound?
›Do they suit Klipsch RB51 (27 × 17 cm, ≈ 5 kg) and RP-500M?
›Do they suit ELAC Carina BS 243.4 and Debut ConneX DCB41?
›Do they suit the ProAc Studio 110?
›How are the speakers fixed to the stand?
›Which bookshelf speakers suit the 660 mm height?
Customer reviews
4.8 of 5 · 13 ratingsВладимир Е., Инта · 2026-10-11Excellentverified purchase
Хорошая качественная стойка. Не болтается, не вибрирует. Не каких нарекании нет. Хороший продукт за свои деньги. Писать довольно тяжело, ибо подобные вещи у меня впервые.
Вадим С., Железнодорожный · 2026-01-03Excellentverified purchase
Все отлично, собрал за 5 мин, устойчивее и тяжелее моих предыдущих стоек, соответственно доволен. Работа менеджера, как и ранее, качественно и по делу, ничего лишнего. Все супер!
Виталий Г., Тольятти · 2024-10-22verified purchase
Отличное качество при более, чем приемлемой цене. Собирается легко, выглядит красиво. Опять же, наш бренд!
Сергей М., Невинномысск · 2024-06-20Excellentverified purchase
Качественные и недорогие стойки. Долго ждал Old School, но не пожалел, что купил Радиотехнику. Полочники ELAC Uni-Fi Reference UBR62, добавил по 1,5 пакета песка на стойку (всего 3) и подставки под шипы Audiocore Protector 01. Я очень доволен. В комплекте дополнительно силиконовые подушечки от 3M, приятная мелочь. Сборка интуитивно понятна и проста, инструкция не понадобилась. Спасибо Аудиомании!
Audiomania expert opinion
T6 — ответ на самый частый вопрос о стойках: «подойдут ли под мои колонки?». В обсуждении специалисты ответили «подойдут» для Sigma 1.01, ELAC Carina BS 243.4, Debut ConneX DCB41, Klipsch RB51 и RP-500M, ProAc Studio 110 и для корпуса 22 × 32 см — правило простое: площадка должна быть меньше основания колонки. AI draft, under review[7]
Слабое место — масса: около 3 кг на стойку. Засыпка 2,5 кг песка делает её заметно инертнее («чем тяжелее опора, тем меньше передаются вибрации»). Для тяжёлых или широких полочников специалист советует рассмотреть стойки с более широкой площадкой. AI draft, under review[3]