Skip to content
Radiotehnika PH001 phono stage
  • Radiotehnika PH001 phono stage — photo 2
  • Radiotehnika PH001 phono stage — photo 3
  • Radiotehnika PH001 phono stage — photo 4
phono stageRadiotehnikaL086%

Radiotehnika PH001 phono stage

phono stage · in: Phono MM · out: RCA line · gain 40 dB, MM · entry

15,990 RUBeachin store· Elektrozavodskaya (Moscow)

Instalment: Buy now, pay later: 0-0-10 at our expense

Delivery by: 2026-11-09

prices and stock as of 2026-11-05

Audiomania expert verdict

The Radiotehnika PH001 is a compact entry-level MM phono stage (40 dB, 47 kΩ / 220 pF, RIAA ±0.3 dB, external PSU, ground terminal) with the best reputation at its price: specialists rank it above the Dynavox TC-5B and promise more stage and detail than the built-in stages of simple decks and receivers. Honest caveat: with stock cartridges like a VM95E or OM10 the difference is small, and against a good amp stage of Audiolab 7000A class it “will not add much”. MC needs the PH002. AI draft, under review

03

In brief

Best if you are looking for:

  • turntables without a phono stage (Rega Planar 1, Pro-Ject) with an amplifier or active speakers lacking a PHONO input AI draft, under review
  • replacing the built-in stages of simple turntables and receivers: specialists promise “a gain in soundstage and overall detail”, an owner — “the sound got many times better” AI draft, under review
  • anyone planning a better MM cartridge (VM95ML, Goldring E3): “an external phono stage to work with more advanced cartridges” AI draft, under review
  • compact systems: a “little box” with an external PSU sits next to the deck AI draft, under review

Keep in mind:

  • MM only: MC cartridges need the PH002 (“the difference is MC support”) AI draft, under review
  • with basic cartridges (AT3600L, VM95E, OM10) the gain over a built-in stage is “insignificant” — specialists advise changing the cartridge first AI draft, under review
  • against a good built-in amp stage (Audiolab 7000A with a VM95ML) it “will not add much” — the specialist points to a Parasound Zphono / iFi ZEN Phono instead AI draft, under review
  • no power indicator; the light body (0.29 kg) tips back under the cables’ weight AI draft, under review
04

Product DNA

L086%

A structured sound passport: every value carries a source and a confidence.

Role in the system
Phono stagecalculated1
Upgrade value vs built-in
entry, conical: optional; entry, elliptical: optional; mid, microline: recommendedAudiomania specialist0.5
± 1

Alternative value

  • mid, microline: optional Audiomania specialist0.5

    С VM95ML против встроенного ФК Audiolab 7000A: «Radiotehnika PH001 не даст особого прироста»

MC capable
nomanufacturer1
Use scenarios
ideal: Vinyl system; good: Home stereocalculated0.75
Optimal room area
not enough data to calculate
Tier
entrycalculated1
What else you need
amplifier, interconnectcalculated1
05

Sound profile

The profile appears after an Audiomania expert audition.

08

Sound character

No audition or professional review yet — below are only facts from the specs and calculations.

Technical reference

Gain
MM: 40spec sheet1
Role in the system
Phono stagecalculated1
09

Use scenarios

Suits:

  • a deck without a phono stage + active speakers or an amplifier without a PHONO input AI draft, under review
  • upgrading a receiver’s/budget amp’s built-in stage (Denon PMA-520AE, Denon DP-300F) — stage and detail AI draft, under review
  • a system with an advanced MM cartridge (VM95ML, Goldring E2/E3) AI draft, under review

Less suited to:

  • MC cartridges — incompatible, the PH002 is needed AI draft, under review
  • replacing a good built-in stage of Audiolab 7000A class — “will not add much” AI draft, under review
  • systems with entry-level conical/elliptical stock cartridges — change the cartridge first AI draft, under review
10

Technologies and construction

  • Precise RIAA equalisation for MM

    What it is: An MM stage with 40 dB gain, 47 kΩ / 220 pF input and ±0.3 dB RIAA on precision components; THD+N < 0.015 %, S/N > 86 dB.

    Practical benefit: Correct tonal balance and output headroom (498 mV) for any line input; specialists note more stage and detail than budget amplifiers’ built-ins. AI draft, under review

  • Low-noise components

    What it is: A circuit built on selected low-noise parts with an improved RIAA network.

    Practical benefit: A clean noise floor when amplifying the cartridge’s tiny signal — “balanced sound with precise nuance” (description). AI draft, under review

  • Shielded metal case

    What it is: A compact matte-black metal case, 100 × 45 × 93 mm, shielding the sensitive circuits.

    Practical benefit: Less pickup of interference and a spot next to the deck; the downside of low mass — the body “tips back” under the cables. AI draft, under review

  • External 24 V power supply

    What it is: 24 V / 630 mA from an external adapter; 3.3 W consumption.

    Practical benefit: The transformer is outside the case — “removes its influence on the sensitive analogue circuits”. AI draft, under review

  • Gold-plated RCA and ground terminal

    What it is: Gold-plated RCA in and out and a ground terminal for the deck’s earth lead.

    Practical benefit: Reliable contact and a way to kill hum from decks with a ground terminal (AT-LP120X, AT-LP140XP). AI draft, under review

11

Amplifier requirements

Inputs
Phono MM
Outputs
RCA line
12

Recommended system connection

No in-stock models pass the compatibility rules right now — ask the advisor.

14

Recommended right now

over the 45-product sample

In-stock, current models only; refreshed with prices (2026-11-05). Not indexed.

No in-stock models pass the compatibility rules right now — ask the advisor.

rules version 1.0.0+c1.0.0

16

Comparison with similar models

No similar models in the catalog yet.

17

Specifications

Main

Gain
MM: 40
RIAA accuracy
0.3 dB
SNR
86 dB
Max output level
498 mV
THD
0.015 %
Power supply
внешний адаптер 24 В постоянного тока / 630 мА; потребление 3,3 Вт / 15 мА

Construction

Finishes
Black (чёрный матовый)

Drivers

Cartridge types
MMmanufacturer

Connection

Input load
kohm: 47; pf: 220
Ground terminal
yesAudiomania specialist
Outputs
RCA line
Inputs
Phono MM
Analogue output
RCA
Output impedance
47,000 Ω

Dimensions

Dimensions (W×H×D)
100 × 45 × 93 mm

Weight

Weight
0.29 kg

Box contents

Warranty
12 months
In the box
Фонокорректор, Внешний блок питания 24 Вmanufacturer
18

Documents

No documents yet.

19

FAQ

›Does the PH001 work with MC cartridges? How does it differ from the PH002?
No — the PH001 is “for MM cartridges”. A specialist on the PH002: “the difference is MC cartridge support” — the rest is the same.
›Is there a ground terminal?
Yes: “The phono stage has a ground terminal” (asked about an AT-LP140XP).
›Will the PH001 improve on a turntable’s built-in stage (LP002P with VM95E, Lenco with AT-3600L, Pro-Ject A1 with OM10)?
With basic stock cartridges — little: “with a VM95E the gain is insignificant”, with an AT-3600L “a minor gain”, with an OM10 “not much gain, but a slightly higher signal level”. Specialists advise changing the cartridge first (Goldring E2) and getting an external stage “to work with more advanced cartridges”. One specialist still suggested a home trial of the PH001 — “you will be pleasantly surprised”.
›Is the PH001 worth it instead of the amplifier’s phono stage?
Depends on the amplifier. Instead of a Denon PMA-520AE’s stage (AT-LP120X) — “more detail, space and depth”; instead of a Denon with an ATN95 — “a gain in soundstage and overall detail”; instead of a Pioneer A-10AE with a 2M Red — “better, but not significantly”. Against an Audiolab 7000A with a VM95ML — “the built-in is quite adequate… the PH001 will not add much”; that is Parasound Zphono territory.
›Which is better — PH001, Dynavox TC-5B, iFi ZEN Phono or Parasound Zphono?
The Dynavox TC-5B “is noticeably inferior” to the PH001. A step up from the PH001: iFi audio ZEN Phono V3 (“more detailed and cleaner” — for a Lenco L-3810 + Nagaoka JT-80LB + ELAC B5.2) and Parasound Zphono (“cleaner and more detailed” — for a VM95ML with an Audiolab 7000A).
›Does it work with active speakers (S20NA, ELAC ConneX)?
Yes: the PH001 goes between the deck and the active speakers’ line input. For a Phaze Audio Diana mk2 + S20NA with a Goldring E3 a specialist answered “definitely excellent”; with a Pro-Ject Automat A1 (OM10) + ELAC DCB41 — a small gain, but a higher signal level.
›Can I try the phono stage at home?
“You can take the phono stage for a home listen; we can discuss the terms by phone” — essentially a purchase with a 14-day return if the unit is fault-free.
›Is there a power indicator and switch?
Per an owner there is no on/off indicator (“I keep forgetting to switch it off”), and the light body (0.29 kg) tips back once all cables are plugged in. The specs do not mention a power switch.
›What are the key specs?
Gain 40 dB (1 kHz), input 47 kΩ / 220 pF, RIAA ±0.3 dB, THD+N < 0.015 %, S/N > 86 dB, max output 498 mV at 5 mV in, bandwidth 10 Hz – 50 kHz (−3 dB), 24 V / 630 mA external PSU, 100 × 45 × 93 mm, 0.29 kg, 12-month warranty.
20

Customer reviews

4.8 of 5 · 12 ratings
  • Антон А., Волгоград · 2026-06-01verified purchase

    Прекрасный фонокорректор. Выполняет свои функции на 100%. Даёт очень детализированный звук. Относительно недорогой. Из недостатков нет индикации вкл/выкл, постоянно забываю выключать и при подключении всех проводов заваливается назад и передняя панель получается приподнятой над тумбой.

  • Владислав К., Одинцово · 2026-03-04Excellentverified purchase

    Прекрасный фонокорректор, очень легко подключается, супер минималистичный, фотографии не передают его истинный размер, такая прям маленькая коробочка, мне дизайн очень понравился и звук роскошный!

  • Алексей Б., Москва · 2026-02-25Excellentverified purchase

    Для неискушенного меломана в начале винилового пути считаю, что работает достаточно хорошо. Слушал на разных жанрах совместно с AT-140 с стандартным картриджем - проблем не заметил.

  • Вадим Г., Москва · 2025-12-09Excellentverified purchase

    Для моего проигрывателя, Project a1, вполне подходит.

  • Светлана Б., Мытищи · 2025-07-17Excellentverified purchase

    Отличный качественный товар

  • Дмитрий О., Тверь · 2025-03-20Goodverified purchase

    Отличный бюджетный фонокоректор!

  • Никита П., Казань · 2025-03-17Excellentverified purchase

    Очень крутой Фонокорректор. Мой запрос закрыл с головой

  • Сергей Д., Истра · 2025-03-04Excellentverified purchase

    Звук реально стал в разы лучше. И высокие прибавились, басы, разделенте каналов. Доставили меньше, чем за сутки. Спасибо! Успехов!

+1

21

AI summary of customer reviews

Based on 9 customer reviews.

Most often noted:

  • noticeably better than a built-in: “the sound got many times better”, “very detailed sound” AI draft, under review
  • inexpensive, compact, easy to connect AI draft, under review

Sometimes mentioned:

  • no power indicator; the light body tips back under the cables AI draft, under review
  • with a basic stock cartridge — “works well enough”, no raptures AI draft, under review
22

Audiomania expert opinion

Audiomania specialists judge the PH001 by what it replaces. Instead of a Denon stage with an ATN95, or a Denon PMA-520AE’s stage with an AT-LP120X — “a gain in soundstage and overall detail”, “more detail, space and depth”. Instead of the LP002P’s built-in with a VM95E — “an insignificant gain”, with a Lenco and AT-3600L — “minor”, with a Pro-Ject A1 and OM10 — “not much gain, but a slightly higher signal level” (though a colleague suggested a home trial: “you will be pleasantly surprised”). AI draft, under review[6]

The ceiling is stated too: with a VM95ML and Audiolab 7000A “the amplifier’s built-in stage is quite adequate … the PH001 will not add much” — for a step up they name the Parasound Zphono and iFi ZEN Phono V3 (“more detailed and cleaner sound”). Against the Dynavox TC-5B the PH001 wins: that one “is noticeably inferior”. AI draft, under review[3]