Skip to content
Audiomania · AdvisorРусский
KEF S2 speaker stands
  • KEF S2 speaker stands — photo 2
  • KEF S2 speaker stands — photo 3
  • KEF S2 speaker stands — photo 4
standKEFL077%

KEF S2 speaker stands

657 mm · plate 190×154 · KEF LS50 Meta, KEF LS50 Wireless II · fillable · entry

56,070 RUBper pairin stock· Moscow (warehouse)
Buy on audiomania.ruCompareBook a listening session

prices and stock as of 2026-11-05

Audiomania expert verdict

KEF S2 is the factory stand for the LS50 Meta and LS50 Wireless II: steel and aluminium, 4.85 kg per stand, fillable, a hidden cable channel exiting at the rear, spikes with pads and five colours to match the speakers. For the LS50 it is the native choice; for other bookshelves pick universal stands. AI draft, under review

Ask about KEF S2

Will it suit your amplifier or room, what else to buy, what to compare with.

03

In brief

Best if you are looking for:

  • owners of KEF LS50 Meta and LS50 Wireless II — designed for them and colour-matched AI draft, under review
  • a tidy installation: cables hide inside the column and exit at the rear AI draft, under review
  • maximum inertness: steel / aluminium construction plus ballast filling AI draft, under review
  • parquet and laminate: the spikes already come with protective pads AI draft, under review

Keep in mind:

  • a model-specific stand: the 190 × 154 mm plate is made for the LS50; other speakers are better served by universal stands AI draft, under review
  • maximum load and ballast mass are not published AI draft, under review
  • priced per pair; 652 / 657 mm height — for the LS50 this is KEF's intended height AI draft, under review
  • no customer reviews yet — the stability and damping scores are drafts AI draft, under review
04

Product DNA

L077%

A structured sound passport: every value carries a source and a confidence.

Fit rule
tweeter at ≈ 100 cm; speaker base up to 317 × 257 mmcalculated0.5
Use scenarios
not enough data to calculate
Optimal room area
not enough data to calculate
Tier
entrycalculated0.75
What else you need
calculated1
05

Sound profile

The profile appears after an Audiomania expert audition.

08

Sound character

No audition or professional review yet — below are only facts from the specs and calculations.

09

Use scenarios

Suits:

  • KEF LS50 Meta and LS50 Wireless II — the native solution AI draft, under review
  • colour-matched interior, hidden cables AI draft, under review

Less suited to:

  • other bookshelf speakers — a model-specific 190 × 154 mm plate AI draft, under review
  • heavy monitors — load not published AI draft, under review
10

Technologies and construction

  • Steel and aluminium construction

    What it is: Made of steel and aluminium; 4.85 kg per stand.

    Practical benefit: “exceptional rigidity and good vibration damping”.

  • Ballast cavities

    What it is: A centre column with internal cavities for filling.

    Practical benefit: “almost completely acoustically inert, to the benefit of the sound”.

  • Cable channel with rear exit

    What it is: A speaker-cable channel inside the column; the wires exit at the rear of the stand.

    Practical benefit: “for the tidiest possible look of the system”.

  • Spikes with protective pads

    What it is: The base rests on spikes supplemented with protective pads.

    Practical benefit: Decoupling from the floor without scratching parquet — no separate pads needed. AI draft, under review

  • Five finishes to match KEF speakers

    What it is: Carbon Black, Titanium Grey, Mineral White, Royal Blue SE, Crimson Red SE.

    Practical benefit: “with matched colours the speakers and stands look like a single piece”.

12

Which speakers it suits

Fit rule
tweeter at ≈ 100 cm; speaker base up to 317 × 257 mmcalculated0.5

No in-stock models pass the compatibility rules right now — ask the advisor.

16

Comparison with similar models

  • How it differs from Radiotehnika T6 speaker stands

    KEF S2 and Radiotehnika T6 are the same tier; they differ in character and in the figures below.

    Full comparison →
17

Specifications

Main

Cable channel
present; entry: rear
Model-specific
KEF LS50 Meta, KEF LS50 Wireless II
Sold as
per pair

Construction

Fillable
possible
Material
алюминий, сталь
Feet
spikes with pads
Finishes
Carbon Black, Titanium Grey, Mineral White, Royal Blue Special Edition, Crimson Red Special EditionAudiomania

Dimensions

Height
without spikes: 652; with spikes: 657
Top plate
190 × 154 mmAudiomania specialist
Bottom plate
226 × 308 mm

Weight

Weight (each)
4.85 kg
18

Documents

19

FAQ

›What is the top plate size?
“Top plate size, mm — 190 × 154” (specialist, 2023-09-15).
›How does the cable channel work — do the wires exit through the plate or at the rear?
“The wires come out at the rear of the stand” (specialist, 2023-11-22): the channel runs inside the column and exits at the back.
›Will it suit other bookshelf speakers?
The stand is designed for the LS50 Meta and LS50 Wireless II: 190 × 154 mm plate, load not published. Speakers with a similar footprint will physically sit on it, but for other models universal stands (Radiotehnika T6, Wharfedale ST1) are the honest choice. AI draft, under review
›Is the price per pair?
Yes, the price is per pair of stands.
›What and how much ballast?
The maker only says “suitable ballast” — no mass given. Typically dry calcined sand or shot; fill the cavity volume leaving no voids. AI draft, under review
›Which colours are available?
Five finishes matching KEF speakers: Carbon Black, Titanium Grey, Mineral White, Royal Blue Special Edition, Crimson Red Special Edition.
›How tall is the stand?
657 mm with the base plate per the table (226 × 657 × 308 mm); the page selector says 652 mm (taken as the height without spikes).
›Can the LS50 Wireless II power lead run through the stand?
The channel is described as “for the speaker cable” with a rear exit; its bore is not stated. The LS50 Wireless II needs a power lead (and possibly Ethernet) — ask a consultant whether the stock mains cable passes through. AI draft, under review
20

Customer reviews

No customer reviews yet. Be the first owner to share your experience.

22

Audiomania expert opinion

S2 решает задачу LS50 как единого объекта: цвет в цвет, кабель внутри колонны, площадка 190 × 154 мм под компактный корпус. Конструкция из стали и алюминия с полостями под балласт, по описанию, «практически полностью акустически инертна». AI draft, under review[3]

Обзоров и отзывов у нас пока нет, поэтому устойчивость и демпфирование в карточке — черновые оценки по конструкции. Для LS50 Wireless II учтите: кроме акустического кабеля нужно провести питание, а канал описан как «для акустического кабеля». AI draft, under review[3]